Feel free to browse our different product categories listed on this page, and see the M&M Lifts, Inc. difference by yourself!
All models of M&M Lifts, Inc. Aerial Lifts comply with ANSI A-92.2 1990 and OSHA 1926.556, 1910.67 regulations.
M&M Lifts, Inc. reserves the right to make changes to our products or specifications at any time without notice or obligations.
| DUR-A-LIFT DO-32 |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform |
9.60 m |
32.00 ft |
|
Working height |
11.10 m |
37.00 ft |
|
Horizontal reach |
10.50 m |
26.30 ft |
|
Outriggers |
2 |
|
Rated platform capacity |
160 kg |
350 lbs |
|
Weight of lift and mounting |
1090 kg |
2400 Lbs |
CONTROLS
Full pressure proportional controls mounted on the basket for easy access in all boom positions.
Upper control shut-off provided at turntable.
Three control levers at the turntable and basket with a deadman at the basket.
Engine start/stop from the basket.
| HYDRAULIC SYSTEM |
|
|
|
Working pressure |
153 bar |
2000 psi |
|
Hydraulic pump flow |
18-23 lpm |
5-7 gpm |
SAFETY
Integral holding valves in each cylinder.
Pressure relief valve.
Upper boom constructed of fiberglass and rated for work voltages of 46kv and below.
Non-conductive hoses and fiberglass rods provide levelling and control through the insulated boom section.
Emergency stop system.
MECHANICAL SYSTEM
Levelling system: is fully automatic by totally enclosed glass rods and chain parallelogram system.
Rotation: is hydraulically driven spur gear with shearball rotation bearing.
BOOM ACTION
Lower boom articulation: 100�
Upper boom articulation: Up to 196�
OPTIONS
Continuous Rotation.
Pedstal mounted outriggers.
Torsion bar.
12V DC full function backup system.
Single hand control lever.
Basket liner.
Basket and control cover.
Hydraulic tool circuit at basket and pedestal.
Basket tilt system.
Automatic or two-speed throttle advance.
Upper boom electrical test bands.
Lower boom fiberglass insert.
Lower boom lifting hook.
| DUR-A-LIFT DO-36 |
| SPECIFICATIONS |
|
|
|
Height to bottom of platform |
10.90 m |
36.00 ft |
|
Working height |
12.40 m |
41.00 ft |
|
Horizontal reach |
9.20 m |
30.20 ft |
|
Outriggers |
2 |
|
Rated platform capacity |
160 kg |
350 lbs |
|
Weight of lift and mounting |
1135 kg |
2500 Lbs |
CONTROLS
Full pressure proportional controls mounted on the basket for easy access in all boom positions.
Upper control shut-off provided at turntable.
Three control levers at the turntable and basket with a deadman at the basket.
Engine start/stop from the basket.
| HYDRAULIC SYSTEM |
|
|
|
Working pressure |
153 bar |
2000 psi |
|
Hydraulic pump flow |
18-23 lpm |
5-7 gpm |
SAFETY
Integral holding valves in each cylinder.
Pressure relief valve.
Upper boom constructed of fiberglass and rated for work voltages of 46kv and below.
Non-conductive hoses and fiberglass rods provide levelling and control through the insulated boom section.
Emergency stop system.
MECHANICAL SYSTEM
Levelling system: is fully automatic by totally enclosed glass rods and chain parallelogram system.
Rotation: is hydraulically driven spur gear with shearball rotation bearing.
BOOM ACTION
Lower boom articulation: 100º
Upper boom articulation: Up to 196º
OPTIONS
Continuous Rotation.
Pedstal mounted outriggers.
Torsion bar.
12V DC full function backup system.
Single hand control lever.
Basket liner.
Basket and control cover.
Hydraulic tool circuit at basket and pedestal.
Basket tilt system.
Automatic or two-speed throttle advance.
Upper boom electrical test bands.
Lower boom fiberglass insert.
Lower boom lifting hook.
|
